May I use one AvalonMiner Controller (including Raspberry Pi 1, 2, & 3) with mixed Canaan AvalonMiner A6, A721 & A741?

Controller means AvalonMiner Controller (including Raspberry Pi 1, 2, & 3) in this FAQ.

Canaan recommends that you connect different types of AvalonMiner product series to separate Controllers. So if you have 5 X A6, 10 X A721 and 7 X A741, you would connect the A6 to one Controller, the A721 to another Controller, and the A741 to yet another Controller. Technically you could connect the A721 and A741 to the same controller, but then the voltage offset will be the same for both the A721 and the A741 in your chain. Of course, each Controller can manage 20 AvalonMiners, so if you have more than 20 units, you need to plan your setup accordingly.

Discount Schedule A741

Thank you interested in Canaan Discount Schedule A741.

Our Discount Schedule up to 1000 units is now built into the shop. But please do input any quantity on the shop.

Place your order:

And, after placing your order, please if your order quantity is 50 or more units because we can save you massively on shipping cost.

How do I upgrade my AvalonMiner and AvalonMiner Controller?

This guide is targeted at Avalon 6,¬†¬†AvalonMiner 721 and AvalonMiner 741, called “AvalonMiner” in this guide to be upgraded by the AvalonMiner Controller (including Raspberry Pi 3), to be called “Controller” in this guide.

To upgrade the AvalonMiner, please insure your AvalonMiner is connected to a Controller. Make sure as well, you can access your Controller from a simple web browser successfully. This interface is called the Controller “Dashboard”.

Update Your Controller

  1. Access your Controller’s Dashboard.
  2. Click left-hand menu button “Advanced Version”.
  3. Click “System” tab.
  4. Click “Backup / Flash Firmware” tab.
  5. In the “Flash new firmware image” section, click “Choose File”
  6. Select the latest image provided from Canaan Support page for your product.
  7. Click “Flash image…”
  8. Wait on image to completely be written, at least 1-2 minutes of time.

Update Your AvalonMiner

  1. Access your Controller’s Dashboard.
  2. Click left-hand menu button “Advanced Version”.
  3. Click the top menu “Status” tab.
  4. Click the “MM Upgrade” tab.
  5. In the “Flash new MM firmware image” section.
  6. Click “Choose File”
  7. Select the appropriate MM firmware image.
  8. Click “Upload”
  9. Wait at least 3-5 minutes for the process to complete.

That is it! We will continue to improve this guide. If you found any issues with this guide, please submit a ticket and help us improve.